J3CS 35 JJ Electric Actuator

JJ electric actuator J3C S35

J3C-S35 24V-240V On Off Electric Actuator Maximum 38 Nm Torque

Maximum 38 Nm of torque. 24-240V Multi-voltage reversible IP67 on-off quarter turn smart electric actuator, with manual override, heater, torque limiter, LED status light, external Din plug connection and dome visual indicator. F03,F04 & F05 x 14mm female star mounting.

On-off electric actuator. Power open, power close. Stays put on external power failure. Designed to have power on at all times.

Max break torque 38 Nm, and the Max run and reseat torque 35Nm.
Max ambient temp range -20 to +70C

12V Conversion PCB kit
Failsafe using internal battery (BSR) kit.
Modulating using digital magnetic positioner (DPS) kit.
Failsafe modulating using BSR & DPS kits.
F07 x 17mm female star mounting.
Teflon Coated mounting and drive output.

Our new range of actuators J3CS offers the possibility to cover the entire voltage range: 
– The series J3CS S20 ranges from 24 VDC / VAC to 240 VDC / VAC with only one actuator. 
– The series J3CS B20 works to 12 VAC / VDC .
It is therefore a quarter turn actuator, Total multi voltage with a maximum torque of 38Nm . 
Its electronic board is divided into two parts, including a power supply and a common control for all models. 
The other features such as automatic / manual lever (CDM) , the visual position indicator(VPI) , the manual override(EMO) , visual control of operation RGB LED (VCO) , the automatic temperature control (ATC) , and electronic control torque (ETL) are common to those of the previous series J3C.
The new DPS 2017 with an encoder system has been designed for this new range.
As is the case with our new BSR 2017 system, which is designed exclusively for our J3CS range.

Got questions or ready to buy
Tel: +44 (0) 28 93 362282