Inoxpa food grade pump

inoxpa food pump bare shaft

Inoxpa hygienic food grade pump

A high capacity centrifugal pump (up to 1000 m³/h) designed for an unfulfilled need in food-processing, chemical also pharmaceutical industries.

Its applications include processes in brewing, dairy and beverage industries in general, also ultra-filtering processes.

Also in the textile industry and in some specific processes in the chemical, cosmetics and pharmaceutical industries.

Operating principle

Inoxpa food grade pump is housed inside the casing also the impeller rotates in conjunction with the pump shaft.

With this arrangement, the impeller blades convey energy to the fluid in the form of kinetic energy and pressure energy.

This pump is not reversible by a simple reversal of the direction of rotation.

The direction of rotation is clockwise when the pump is viewed from the rear side of the motor.

Design and features

Casing with volute manufactured with 8 mm cold-formed plate also aseptic flanges according to DIN 11864-2.

Double curvature impeller with blades on the rear side to reduce axial thrust.

Axial adjustment of impeller (bare shaft version) also hygienic mechanical seal.

Fully drainable pump, designed according to the EHEDG standards.

IEC B3 motors (B35 close-coupled constructions), IP 55, F-class insulation.

Options

Close-coupled construction for models 250 also mechanical seal in SiC/SiC for abrasive materials.

Tandem type mechanical seal and pressurized double mechanical seal.

Gaskets: FPM and PTFE also industrial finish (DIN-TEX) and motor shroud.

Motors with additional protection also stainless steel base plate and  ATEX version available.

Materials

Parts in contact with pumped media: AISI 316L
Lantern and bearing support: CF8 / GG-22
Gaskets: EPDM according to FDA 177.2600
Mechanical seal: SiC/C/EPDM
Inside surface finish: Ra ≤ 0.8
Outside surface finish: satin

Got questions or ready to buy
Tel: +44 (0) 28 93 362282